BMW›440i xDrive›2019›Overview/bmw/440i-xdrive/2019/base/

2019 BMW 440i xDrive

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2019 440i xDrive.

Transmission Automatic (S8)

The 2019 BMW 440i xDrive is EPA-rated at 20/29/23 mpg city/highway/combined.

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

Lug nut torque103 ft-lbsOEM · verified

EPA fuel economy20/29/23 mpgEPA · verified

Fitment & sizes

Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.

From the factory this vehicle uses OE oil filter 11428583896. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.

Tail / brake / turnREVERSEOEM · verified

Tire size225/45R18/XL 95V, Coupe: 225/45R18 91VOEM · verified

Wheel / rim8; Optional: 9, Optional Convertible Front: 8, Optional Convertible Rear: 8.5, 9. Optional Coupe Front: 8, Optional Coupe Rear: 8.5, 8.5, 9 inOEM · verified

OE service part numbers OEM · verified

Engine oil filter	11428583896 alt 11427826799
Engine air filter	13718632502
Spark plug	12120040551
Battery	61216806755
Front wiper blades	61615A43587
Thermostat	11538658571 alt 11537642854
Cabin air filter	64116821995 alt 64119237555

Full specifications

Engine, drivetrain, dimensions and economy.

Engine & drivetrain NHTSA vPIC

Transmission

Automatic (S8)

Dimensions & weight NHTSA vPIC

Overall length	182.7 in
Overall width	72 in
Overall height	54.3 in
Wheelbase	110.6 in
Curb weight	4330 lb
Track (front / rear)	61 / 62.6 in
Weight distribution (front / rear)	49/51

Ratings & economy EPA / vPIC

EPA city / highway / combined	20 / 29 / 23 mpg
Drivetrain	All-Wheel Drive
Recommended fuel	Premium Gasoline

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

Torque lug nuts to 103 ft-lbs. The firing order is 1-5-3-6-2-4.

Engine torques

Cylinder Head Instructions	Use New Fasteners.
Cylinder Head Steps	13mm

Chassis torques

Lug Nuts

103 ft-lbs

Ignition

Cylinder Firing Order

1-5-3-6-2-4

Battery & A/C

Refrigerant	R134a
Refrigerant Capacity	1.19-1.23 lbs
Oil Group	PAG
Oil Type	46

Service checks

Fuel Pump Pressure Minimum	725.0
Fuel Pump Pressure Maximum	2900
RPM	725.0
Engine Compression	174

Brakes

ABS Sensor Torque

Front: 6.0; Rear: 6.0

Multi-step torque procedures OEM · verified

Intake Manifold to Engine Bolts — tightening sequence 3 stages

1	Bolts 1-7	3.7 ft. lbs
2	Bolts 1-7	7.3 ft. lbs
3	7.3

Exhaust Manifold to Cylinder Head Bolts — tightening sequence 4 stages

Prep Alternate tightening all fasteners evenly. Start at the center and work outwards. Step 1: 7.3 ft. lbs.

2	7.3 ft. lbs.	7.3 ft. lbs
3	11.8 ft. lbs.	11.8 ft. lbs
4	11.8 ft. lbs.	11.8 ft. lbs
5	11.8

Factory maintenance schedule OEM · verified

This vehicle uses condition-based service — it signals maintenance needs through its onboard service indicator rather than fixed mileage intervals. Items on the factory schedule:

Replace	Engine Oil Filter · Spark Plugs · Engine Oil · Keyless Entry Remote Battery · Cabin Air Filter · Engine Air Filter Element
Inspect	Windshield Washer System · Parking Brake System · Body Water Drains · Underbody · Brake Line · Tire Repair Kit Sealant · Disc Brake Caliper · Convertible Top
Road test	Universal Vehicle Operation
Inspect Fluid Level	Engine Coolant System
Reset	Tire Pressure Monitoring System
Drain, Refill & Bleed	Brake Hydraulic System