Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
| Every 100,000 mi | Transmission Assembly (drain & refill) |
| At 120,000 mi | Oxygen Sensor (replace) |
Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2010 335D.
The 2010 BMW 335D rides on the E90 platform and is paired with an Automatic (S6) transmission, carrying EPA ratings of 23/36/27 mpg. Its prescribed maintenance protocol calls for 7.7 quarts of oil meeting 15W-40, 10W-40, or 10W-30 API SJ viscosity specifications. As a 2010 model-year entry in the 335D overview, those exact factory specifications establish the concrete baseline against which any subsequent reliability and service history must be evaluated.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 48 · 760 CCA battery, OE oil filter 11427788460. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 11427788460 alt 11427788458 |
| Engine air filter | 13717797465 |
| Fuel filter | 13327793672 |
| Front wiper blades | 61612455435 |
| Thermostat | 11517787692 alt 11517805811 |
| Cabin air filter | 64319142114 alt 64319313519 |
Engine, drivetrain, dimensions and economy.
| Transmission | Automatic (S6) |
| Overall length | 178.3 in |
| Overall width | 71.7 in |
| Overall height | 55.9 in |
| Wheelbase | 108.7 in |
| Curb weight | 3825 lb |
| Track (front / rear) | 59.1 / 59.4 in |
| Weight distribution (front / rear) | 50/50 |
| EPA city / highway / combined | 23 / 36 / 27 mpg |
| Drivetrain | Rear-Wheel Drive |
| Passenger volume | 93 cu ft |
| Cargo volume | 12 cu ft |
| Recommended fuel | Diesel |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 7.7 qt of 15W-40 / 10W-40 / 10W-30 API SJ engine oil, DOT 4 brake fluid. Torque lug nuts to 88 ft-lbs, the oil drain plug to M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs. The firing order is 1-5-3-6-2-4. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.
| Brake Fluid | DOT 4 |
| Differential Gear Oil Capacity | 1.2 Pints |
| Differential Gear Oil Capacity | 2 Pints |
| Engine Coolant | ETHYLENE GLYCOL |
| Engine Oil | 15W-40 · API · 10W-40 · 10W-30 · 5W-30 |
| Engine Oil Capacity | 7.7 qt |
| Power Steering Fluid | Use Pentosin CHF 11S |
| Power Steering Fluid | ATF |
| Crankshaft Pulley and/or Damper Bolts | 18 ft-lbs |
| Intake Manifold to Engine Bolts | M6 bolts: 6 ft-lbs, M7 nuts: 9.6 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | 15 ft-lbs |
| Engine Oil Pan Drain Plug | M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs |
| Lug Nuts | 88 ft-lbs |
| Cylinder Firing Order | 1-5-3-6-2-4 |
| Spark Plug Manufacturer | BMW |
| Refrigerant | R134a |
| Refrigerant Capacity | 1.19-1.40 lbs |
| Oil Group | PAG |
| Oil Type | 46 |
| Oil Capacity | 5.70-6.50 oz |
| Standard BCI Group Number | 48 |
| Standard BCI Cranking Performance | 760 cca |
| Optional BCI Group Number | 49 |
| Brake Application | WITH FN3 |
| Torque to Knuckle | 81 ft-lbs |
| Minimum Pad Thickness | Front: 0.145; Rear: 0.145 pads |
| Brake Application | WITH FN3 |
| Rotor Nominal Thickness From | 0.866 in |
| Rotor Nominal Thickness To | 0.866 in |
| Rotor Discard at or Under | 0.803 in |
| 1 | 30 ft. lbs., step 2: 120 | 30 ft. lbs |
Prep Do not reuse old bolts. Coat new bolts with the specified engine oil.
| 1 | 59.0 ft. lbs. | 59 ft. lbs |
| 2 | loosen all bolts 180 degrees starting from the outside working to the inside. | 180 degrees |
| 3 | 37.0 ft. lbs. | 37 ft. lbs |
| 4 | 90 degrees | 90 degrees |
| 5 | 90 degrees | 90 degrees |
Normal service, condensed from the factory interval matrix.
| Every 100,000 mi | Transmission Assembly (drain & refill) |
| At 120,000 mi | Oxygen Sensor (replace) |
Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.
Showing 2 of 5 campaigns on record for this vehicle.
BMW of North America, LLC (BMW) is recalling certain 2009 328i and 328xi, 2009-2011 335d, 2008-2012 M3 Coupe and M3 Convertible, and 2008-2011 M3 Sedan vehicles. The connection of the positive battery cable at the fuse… Remedy: BMW will notify owners, and dealers will replace and secure the positive battery cable connector, free of charge. The recall began August 14, 2019. Owners may contact BMW customer…
BMW of North America, LLC (BMW) is recalling certain 2010-2011 BMW 335d vehicles with diesel engines. The connection of the positive battery cable at the fuse box terminal may degrade over time, possibly resulting in an… Remedy: BMW will notify owners, and dealers will replace the positive battery cable connector and secure it with an improved method, free of charge. The recall began on June 29, 2018…
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
7.7 qt of HIGH PERFORMANCE MINERAL OILS: ABOVE 5 degrees F: 15W-40 API SJ, SL OR SM, -5 degreesF TO 68 degrees F: 10W-40 API SJ, SL OR SM, 5 degreesF TO 50 degrees F: 10W-30 API SJ, SL OR SM, BELOW 50 degrees F: 5W-30 API SJ, SL OR SM, BELOW 32 degrees F:, per the factory manual.
NHTSA lists 5 recall campaign(s) for this model year. Check your specific vehicle by VIN.
EPA figures are 23 city / 36 highway / 27 combined mpg.