BMW328I E922011Overview/bmw/328i-e92/2011/base/
E92 platform

2011 BMW 328I E92

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2011 328I.

Body PASSENGER CARTransmission Automatic (S6)

The 2011 BMW 328i is a passenger‑car built on the E92 platform, featuring a six‑speed automatic (S6) transmission and a 6.9‑quart oil capacity that calls for 15W‑40, 10W‑40, or 10W‑30 API SJ viscosity. With EPA‑rated fuel economy of 18/28/22 mpg city/highway/combined, it balances performance with efficiency. In the 1996‑2015 complaint window, 2011 recorded the highest total of 678 owner complaints—primarily about engine and cooling systems—making it the most problematic year in the model’s reliability history and a cautionary note for prospective owners.

Model year201620152014201120102009

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

Engine oil capacity6.9 qtOEM · verified
Engine oil type15W-40 / 10W-40 / 10W-30 API SJOEM · verified
Lug nut torque88 ft-lbsOEM · verified
EPA fuel economy18/28/22 mpgEPA · verified

Fitment & sizes

Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.

From the factory this vehicle uses a BCI 48 · 570 CCA battery, OE oil filter 11428683168. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.

Battery groupBCI 48 · 570 CCAOEM · verified
Tire sizeP205-55R16; Coupe and Convertible: P225-45R17OEM · verified
Wheel / rim7; Coupe, Convertible and Coupe Sport Pkg Front: 8; Coupe Sport Pkg Rear: 8.5 inOEM · verified

OE service part numbers OEM · verified

Engine oil filter11428683168 alt 11428637821
Engine air filter13717542294
Spark plug12120037663
Front wiper blades61612455437 alt 61612455435
Thermostat11537549476
Cabin air filter64319142114 alt 64319313519

Full specifications

Engine, drivetrain, dimensions and economy.

Engine & drivetrain NHTSA vPIC

TransmissionAutomatic (S6)

Dimensions & weight NHTSA vPIC

Overall length178.3 in
Overall width71.7 in
Overall height55.9 in
Wheelbase108.7 in
Curb weight3362 lb
Track (front / rear)59.1 / 59.4 in
Weight distribution (front / rear)50/50

Ratings & economy EPA / vPIC

EPA city / highway / combined18 / 28 / 22 mpg
DrivetrainRear-Wheel Drive
Passenger volume93 cu ft
Cargo volume12 cu ft
Recommended fuelPremium Gasoline

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

This engine holds 6.9 qt of 15W-40 / 10W-40 / 10W-30 API SJ engine oil, DOT 4 brake fluid. Torque lug nuts to 88 ft-lbs, the oil drain plug to M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs. The firing order is 1-5-3-6-2-4. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.

Lubricants & capacities

Automatic Transmission FluidBMW part number 83222152426
Automatic Transmission Fluid Capacity10.5-11.5
Brake FluidDOT 4
Differential Gear Oil Capacity1.8 Pints
Engine CoolantETHYLENE GLYCOL
Engine Oil15W-40 · API · 10W-40 · 10W-30 · 5W-30
Engine Oil Capacity6.9 qt
Manual Transmission FluidBMW MTF part number 83229408942

Engine torques

Crankshaft Pulley and/or Damper Bolts18 ft-lbs
Engine Flywheel BoltsAT: 92 ft-lbs, MT: 89 ft-lbs
Intake Manifold to Engine Bolts11 ft-lbs
Exhaust Manifold to Cylinder Head Bolts15 ft-lbs
Intake Manifold to Engine Bolts11 ft-lbs
Exhaust Manifold to Cylinder Head Bolts15 ft-lbs
Engine Oil Pan Drain PlugM12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs

Chassis torques

Lug Nuts88 ft-lbs

Ignition

Cylinder Firing Order1-5-3-6-2-4
Spark Plug ManufacturerBMW

Battery & A/C

RefrigerantR134a
Refrigerant Capacity1.19-1.40 lbs
Oil GroupPAG
Oil Type46
Oil Capacity5.70-7.00 oz
Standard BCI Group Number48
Standard BCI Cranking Performance570 cca
Optional BCI Group Number94R

Service checks

Pressure Test29 psi
Radiator Cap Pressure Relief18-22 psi
Engine Compression130-261 PSI. 29 maximum variation. psi
Engine Compression130-261 PSI. 29 maximum variation. psi

Brakes

Brake ApplicationWITH FN3
Torque to Knuckle81 ft-lbs
Minimum Pad ThicknessFront: 0.145; Rear: 0.145 pads
Brake ApplicationWITH FN3
Rotor Nominal Thickness From0.866 in
Rotor Nominal Thickness To0.866 in
Rotor Discard at or Under0.803 in

Multi-step torque procedures OEM · verified

Connecting Rod (Large End) Bearings — tightening sequence 1 stages
115 ft. lbs., Step 2: 12015 ft. lbs
Cylinder Head — tightening sequence 4 stages

Prep Do not reuse old bolts

122.0 ft. lbs.22 ft. lbs
290 degrees90 degrees
3Bolts 1-10 90 degrees90 degrees
445 degrees45 degrees
Cylinder Head — tightening sequence 4 stages

Prep Do not reuse old bolts

122.0 ft. lbs.22 ft. lbs
290 degrees90 degrees
3Bolts 1-10 90 degrees90 degrees
445 degrees45 degrees
Main Bearings — tightening sequence 1 stages
115 ft. lbs., Step 2: 7015 ft. lbs

Factory maintenance schedule OEM · verified

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the spark plugs every 60,000 mi.

Every 60,000 miSpark Plugs (replace)
At 120,000 miOxygen Sensor (replace)

Reliability & federal safety record

Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.

The 2011 model year represents a dramatic anomaly in the federal record, with 678 complaints—nearly five times the 144 logged for 2012 and substantially higher than the single-digit to low-triple-digit figures seen in 1996-2001. While recalls remained elevated at 11 units, comparable to adjacent years, the complaint volume places 2011 at a distinct peak, with subsequent model years showing a consistent downward trend toward 121-286 complaints annually. Technical Service Bulletins increased dramatically to 624 in 2012 and 667 in 2013 even as complaint volumes declined, indicating 2011 was an isolated high-incident year. With 32 fire complaints and 27 crash-related complaints significantly exceeding adjacent model years, the 2011 model presents elevated risk relative to the 2012-2015 range. Buyers should prioritize 2012-2015 model years over this outlier.

11
Open recalls
NHTSA campaigns
148
Service bulletins
Manufacturer communications
1
ODI investigations
Office of Defects Investigation
678
Owner complaints
27 involved a crash · 32 a fire
NHTSA crash-test rating federal NCAP · out of 5 stars
Rollover★★★★★
Owner complaints by model year NHTSA · this generation & adjacent

Owner complaints filed with NHTSA, by component

All 678 complaints on record, top 8 components.

Engine & Engine Cooling162
Engine123
Air Bags70
Electrical System50
Electrical System,Engine38
Unknown Or Other22
Fuel/Propulsion System12
Power Train12

Source: NHTSA Office of Defects Investigation complaint database.

Recalls NHTSA · verified

Showing 2 of 7 campaigns on record for this vehicle.

20V017000Air Bags:Frontal:Driver Side:Inflator ModuleReported 15/01/2020

BMW of North America, LLC (BMW) is recalling certain 2008-2013 128i and 135i Convertibles, 128i, 135i, and M Coupes, 2007-2010 X3 30si and X3 xDrive30i, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i, 2007-2013… Remedy: BMW will notify owners, and dealers will replace the driver air bag. On X5 and X6 vehicles, only the inflator will be replaced. All repairs will be performed free of charge. The…

17V676000Electrical System:WiringReported 25/10/2017

BMW of North America, LLC (BMW) is recalling certain 2006-2011 323i, 325i, 325xi, 328i, 328xi, 330i, 330xi, 335i, 335xi and M3, 2007-2011 328i xDrive, 335i xDrive and 335is and 2009-2011 335d vehicles. The wiring and… Remedy: BMW will notify owners, and dealers will replace the wiring and electrical connectors, free of charge. Interim letters were mailed on November 27, 2017. Owners will receive a…

Technical service bulletins NHTSA · verified

Showing 5 of 148 bulletins on record with NHTSA.

BulletinDateComponentSummary
B0120162025-03-13Electrical SystemThe Footwell Module (FRM) limited warranty for defects in materials and / or workmanship…
B0120162025-02-20Electrical SystemThe Footwell Module (FRM) limited warranty for defects in materials and / or workmanship…
B5108192024-01-16Electrical SystemThe basic conditions for initializing the power windows are not met.
B6113052024-01-11Electrical SystemThe electrical system of BMW vehicles has been subject to an ongoing development process…
SB23-012023-08-02SteeringSpl Parts, Inc. communications index accompanying MCP uploads 23mc40464 & 23mc40471

Common OBD-II trouble codes

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

P0420
Catalyst system efficiency below threshold — Bank 1
P0300
Random / multiple cylinder misfire detected
P0171
System too lean — Bank 1
P0455
Evaporative emission system leak detected — large leak
P0128
Coolant thermostat below regulating temperature
P0442
Evaporative emission system leak detected — small leak

VIN tools

Decode factory build data for a specific vehicle by VIN.

VIN
Decode a VIN to confirm the transmission and build data for a specific 328I. OEM
Build data
Plant, GVWR class, engine and body data for any 17-character VIN.
Recalls
Check open recall campaigns against a specific vehicle by VIN.

Vehicles with shared specs

Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.

Reference guides

Cross-vehicle references for the kinds of data on this page.

Frequently asked

How much oil does the 2011 328I take?

6.9 qt of HIGH PERFORMANCE MINERAL OILS: ABOVE 5 degrees F: 15W-40 API SJ, SL OR SM, -5 degreesF TO 68 degrees F: 10W-40 API SJ, SL OR SM, 5 degreesF TO 50 degrees F: 10W-30 API SJ, SL OR SM, BELOW 50 degrees F: 5W-30 API SJ, SL OR SM, BELOW 32 degrees F:, per the factory manual.

Does the 2011 328I have open recalls?

NHTSA lists 11 recall campaign(s) for this model year. Check your specific vehicle by VIN.

What gas mileage does the 328I get?

EPA figures are 18 city / 28 highway / 22 combined mpg.