Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
| Every 30,000 mi | Oxygen Sensor (replace) |
| Every 50,000 mi | Timing Belt (inspect) |
Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 1988 325I - E30.
Built on the E30 platform, the 1988 BMW 325I requires 4.3 qt of oil maintained within a 20W-50 / 15W-50 / 10W-50 API SL viscosity range. Ownership data for this vehicle indicates 0 recalls and a total of 5 owner complaints, with reported issues concentrated in Engine & Engine Cooling and Visibility. This sparse reporting record positions the model year within a reliability history defined by minimal documented issues for researchers to consider.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses OE oil filter 11421707779. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 11421707779 |
| Engine air filter | 13721720861 |
| Fuel filter | 13321268231 |
| Spark plug | 12121279599 |
| Front wiper blades | 61611387678 |
| Serpentine belt | 11511711091 alt 32421706597 |
| Thermostat | 11531710953 alt 11531265084 |
Engine, drivetrain, dimensions and economy.
| Overall length | 175.2 in |
| Overall width | 65 in |
| Overall height | 54.3 in |
| Wheelbase | 101.2 in |
| Curb weight | 3007 lb |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 4.3 qt of 20W-50 / 15W-50 / 10W-50 API SL engine oil, GL-5 in the differential, DOT 4 brake fluid.
| Brake Fluid | DOT 4 |
| Differential Gear Oil | GL-5 |
| Differential Gear Oil Capacity | 3.6 Pints |
| Engine Coolant | ETHYLENE GLYCOL |
| Engine Oil | 20W-50 · API · 15W-50 · 10W-50 · 5W-30 |
| Engine Oil Capacity | 4.3 qt |
| Engine Oil | 20W-50 · API · 15W-50 · 10W-50 · 5W-30 |
| Engine Oil Capacity | 4.8 qt |
Normal service, condensed from the factory interval matrix.
| Every 30,000 mi | Oxygen Sensor (replace) |
| Every 50,000 mi | Timing Belt (inspect) |
Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.
Owner complaints about the 1988 BMW 325I - E30 lead in one area — the engine & engine cooling,visibility, 1 of 5 reports (20%), well ahead of the next concern. NHTSA has issued no recalls for this vehicle, so these are owner-reported concerns only. 1 of the reports describe a crash and 1 a fire — a small share of the total, but worth weighing against the engine & engine cooling,visibility pattern above. These are tallies of what owners actually reported to the federal government, not an editorial score — and higher-selling models naturally rack up more reports.
All 5 complaints on record, top 5 components.
Source: NHTSA Office of Defects Investigation complaint database.
No recall campaigns on record with NHTSA for this vehicle as of the last data refresh.
Showing 1 of 1 bulletins on record with NHTSA.
| Bulletin | Date | Component | Summary |
|---|---|---|---|
| B510819 | 2024-01-16 | Electrical System | The basic conditions for initializing the power windows are not met. |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
4.3 qt of 14 degrees F TO 122 degrees F: 20W-50 API SL OR GREATER, -4 degrees F TO 104 degrees F: 15W-50 API SL, -22 degrees F TO 68 degrees F: 10W-50 API SL OR GREATER, -40 degrees F TO 23 degrees F: 5W-30 API SL OR GREATER, per the factory manual.
NHTSA lists 0 recall campaign(s) for this model year. Check your specific vehicle by VIN.