Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
| Every 100,000 mi | Oxygen Sensor (replace) |
Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 1996 318IS.
The 1996 BMW 318IS is built on the E36 platform and features a 4-speed automatic transmission. The vehicle is rated at 19/28/22 mpg and requires 5.3 quarts of 15W-40, 10W-40, or 10W-30 API SJ engine oil. With only three owner complaints—primarily regarding air bags—and one recall, this model year sits near the low end of the 1991-1997 complaint history, which peaked at 13 complaints in 1993.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 92 · 575 CCA battery, OE oil filter 11421716192. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 11421716192 |
| Engine air filter | 13721247404 |
| Fuel filter | 13321740985 |
| Spark plug | 12129063428 alt 12129064619 |
| Battery | 61218381724 |
| Front wiper blades | 61618353289 alt 61611387678 |
| Serpentine belt | 11281743193 alt 11281437369 |
| Thermostat | 11531743179 alt 11531743017 |
| Cabin air filter | 64119069895 |
Engine, drivetrain, dimensions and economy.
| Transmission | Automatic 4-spd |
| Overall length | 174.4 in |
| Overall width | 67.3 in |
| Overall height | 53.9 in |
| Wheelbase | 106.3 in |
| Curb weight | 2976 lb |
| Track (front / rear) | 55.5 / 55.9 in |
| EPA city / highway / combined | 19 / 28 / 22 mpg |
| Drivetrain | Rear-Wheel Drive |
| Passenger volume | 86 cu ft |
| Cargo volume | 10 cu ft |
| Recommended fuel | Premium Gasoline |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 5.3 qt of 15W-40 / 10W-40 / 10W-30 API SJ engine oil, DOT 4 brake fluid. Torque lug nuts to 88 ft-lbs. The firing order is 1-3-4-2. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.
| Brake Fluid | DOT 4 |
| Differential Gear Oil Capacity | 2.4 Pints |
| Engine Coolant | ETHYLENE GLYCOL |
| Engine Oil | 15W-40 · API · 10W-40 · 10W-30 · 5W-30 |
| Engine Oil Capacity | 5.3 qt |
| Power Steering Fluid | ATF |
| Engine Flywheel Bolts | 86 ft-lbs |
| Oil Pump to Cylinder BLock Bolts/Studs | 16 ft-lbs |
| Driveshaft Flange to Transmission | 145.0 ft-lbs |
| Lug Nuts | 88 ft-lbs |
| Cylinder Firing Order | 1-3-4-2 |
| Ignition Coil Primary Resistance | 0.4-0.8 ohms |
| Spark Plug Manufacturer | BMW |
| Refrigerant | R134a |
| Refrigerant Capacity | 1.76-2.26 lbs |
| Oil Group | PAG |
| Oil Capacity | 4.05-5.06 oz |
| Standard BCI Group Number | 92 |
| Standard BCI Cranking Performance | 575 cca |
| Optional BCI Group Number | 91 |
| Optional BCI Cranking Performance | 600 cca |
| Fuel Pump Pressure Minimum | 51.0-58.0 @ idle psi |
| Fuel Pump Pressure Maximum | 65.0-97.0 psi |
| Injector Primary Resistance | 15-17 ohms |
| Engine Compression | 159 |
| Engine Oil Pressure | 7.25 at idle, 62.35 regulated. psi |
| Intake Valve Lash | Hydraulic in |
| Exhaust Valve Lash | Hydraulic in |
| Brake Application | WITH SOLID ROTOR / WITH VENTED ROTOR |
| Torque Caliper to Bracket | 18-22 ft-lbs / 81 ft-lbs |
| Torque to Knuckle | 49 ft-lbs / 81-96 ft-lbs / 81 ft-lbs |
| Minimum Pad Thickness | Front: 0.079; Rear: 0.079 in |
| Brake Application | WITH SOLID ROTOR / WITH VENTED ROTOR |
| Rotor Minimum Machining | 0.031 in |
| Rotor Discard at or Under | 0.409 in / 0.331 in / 0.803 in / 0.685 in |
| Rotor Finish | 0.5 - 3.5 μin |
| 1 | 4 ft. lbs., Step 1: 4 ft. lbs., Step 3: 70 | 4 ft. lbs |
| 1 | 22 ft. lbs. | 22 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | 90 degrees | 90 degrees |
| 1 | 14.5 ft. lbs., Step 2: 50 | 14.5 ft. lbs |
Normal service, condensed from the factory interval matrix.
| Every 100,000 mi | Oxygen Sensor (replace) |
Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.
Across the 1991–1997 BMW 318IS federal record, complaints peaked at 13 in 1993 and trended downward thereafter, while recalls fell from a high of three in 1992 to two annually from 1993–1995 and just one in both 1996 and 1997. The 1996 model sits at the bottom of that arc with zero complaints, one recall, no investigations, and one TSB—lower than 1997's two complaints and equal to it in recall and TSB exposure. Its target-year detail, however, lists two crash complaints and top complaint areas of Air Bags and Power Train, though the data does not specify root causes or whether these overlap with the zero federal complaints. TSB counts stayed flat at one per year for the entire generation, so 1996 offers no additional technical-service exposure. Given the lowest complaint volume and the declining recall trend, 1996 looks like a comparatively good year to buy, provided a pre-purchase inspection confirms the single recall has been addressed and any air-bag or power-train concerns are documented.
All 3 complaints on record, top 2 components.
Source: NHTSA Office of Defects Investigation complaint database.
Showing 1 of 1 campaigns on record for this vehicle.
THE CRUISE CONTROL AND THROTTLE CABLES ARE ATTACHED TO THE SAME THROTTLE VALVE ACTUATING LEVER AT THE THROTTLE HOUSING. IT IS POSSIBLE THAT THE PLASTIC BUSHING ON EITHER CABLE COULD BREAK DUE TO ENVIRONMENTAL INFLUENCES… Remedy: DEALERS WILL INSTALL A SPRING STEEL CLIP ON THE OUTER TUBE OF EACH CABLE IN THE AREA OF THE ADJUSTING SCREW AND PLASTIC BUSHING. THE CLIP IS DESIGNED TO PREVENT THE OUTER TUBE…
Showing 5 of 6 bulletins on record with NHTSA.
| Bulletin | Date | Component | Summary |
|---|---|---|---|
| B510819 | 2024-01-16 | Electrical System | The basic conditions for initializing the power windows are not met. |
| 12 15 96 | 1997-11-01 | Vehicle Speed Control | ROUGH IDLE |
| 12 15 96 | 1997-02-01 | Electrical System | M44 MISFIRE FAULTS 50, 51, 52 OR 53. *TW |
| 12/15/96 | 1996-12-01 | Engine And Engine Cooling | M44 MISFIRE FAULTS 50, 51, 52 OR 53. *TW |
| 54/09/96 | 1996-11-01 | Visibility | SUNROOF FAILS TO CLOSE. *TW |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
5.3 qt of HIGH PERFORMANCE MINERAL OILS: ABOVE 5 degrees F: 15W-40 API SJ, SL OR SM, -5 degreesF TO 68 degrees F: 10W-40 API SJ, SL OR SM, 5 degreesF TO 50 degrees F: 10W-30 API SJ, SL OR SM, BELOW 50 degrees F: 5W-30 API SJ, SL OR SM, BELOW 32 degrees F:, per the factory manual.
NHTSA lists 1 recall campaign(s) for this model year. Check your specific vehicle by VIN.
EPA figures are 19 city / 28 highway / 22 combined mpg.