Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
| At 120,000 mi | Oxygen Sensor (replace) |
Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2013 135I Coupe.
The 2013 BMW 135I Coupe is a passenger car built on the E82 platform, mechanically defined by a 7.0-quart oil capacity using 0W-30, 0W-40, or 5W-30 viscosities and an AM-S7 automatic transmission. EPA fuel-economy ratings are listed at 18/25/20 mpg. Reliability data for this model year reflect a narrow but defined record: 15 total owner complaints, two recalls, and air bags as the top complaint area.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 48 · 570 CCA battery, OE oil filter 11428683168. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 11428683168 alt 11428637820 |
| Engine air filter | 13717599285 |
| Fuel filter | 16117313791 |
| Spark plug | 12120037582 |
| Front wiper blades | 61615A87C97 |
| Thermostat | 11537601158 |
| Cabin air filter | 64319313519 alt 64319142114 |
Engine, drivetrain, dimensions and economy.
| Transmission | Automatic (AM-S7) |
| Overall length | 172 in |
| Overall width | 68.9 in |
| Overall height | 55.5 in |
| Wheelbase | 104.7 in |
| Curb weight | 3373 lb |
| Track (front / rear) | 57.5 / 58.3 in |
| Weight distribution (front / rear) | 52/48 |
| EPA city / highway / combined | 18 / 25 / 20 mpg |
| Drivetrain | Rear-Wheel Drive |
| Recommended fuel | Premium Gasoline |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 7.0 qt of 0W-30 / 0W-40 / 5W-30 engine oil, USE CASTROL BOT448 OR EQUIVALENT in the differential. Torque lug nuts to 88 ft-lbs, the oil drain plug to 18.4 ft-lbs. The firing order is 1-5-3-6-2-4. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.
| Differential Gear Oil | USE CASTROL BOT448 OR EQUIVALENT |
| Differential Gear Oil Capacity | 1.7 qt |
| Engine Oil | 0W-30 · 0W-40 · 5W-30 · 5W-40 |
| Engine Oil Capacity | 7.0 qt |
| Power Steering Fluid | Use Pentosin CHF 11S |
| Crankshaft Pulley and/or Damper Bolts | 18 ft-lbs |
| Intake Manifold to Engine Bolts | 11 ft-lbs |
| Engine Oil Pan Drain Plug | 18.4 ft-lbs |
| Lug Nuts | 88 ft-lbs |
| Cylinder Firing Order | 1-5-3-6-2-4 |
| Spark Plug Manufacturer | BMW |
| Refrigerant | R134a |
| Oil Group | PAG |
| Standard BCI Group Number | 48 |
| Standard BCI Cranking Performance | 570 cca |
| Optional BCI Group Number | 94R |
| Optional BCI Cranking Performance | 640 cca |
| Pressure Test | 21.7 psi |
| Radiator Cap Pressure Relief | 19-23 psi |
| Thermostat Opening Temperature | 190 °F |
| Engine Compression | 145-232 PSI. 29 maximum variation. psi |
| Brake Application | WITH 11.81 inch ROTOR / WITH FN3 |
| Torque to Knuckle | 48 ft-lbs / 81 ft-lbs |
| Minimum Pad Thickness | Front: 0.145; Rear: 0.145 pads |
| Brake Application | WITH 11.81 inch ROTOR / WITH FN3 |
| Rotor Nominal Thickness From | 0.787 in / 0.945 in / 0.866 in / 1.024 in |
| Rotor Nominal Thickness To | 0.787 in / 0.945 in / 0.866 in / 1.024 in |
| Rotor Discard at or Under | 0.724 in / 0.881 in / 0.803 in / 0.961 in |
| 1 | 15 ft. lbs., Step 2: 140 | 15 ft. lbs |
Prep Do not reuse old bolts
| 1 | 22.0 ft. lbs. | 22 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | Bolts 1-10 90 degrees | 90 degrees |
| 4 | 45 degrees | 45 degrees |
| 1 | 6 ft. lbs., Step 2: 9.6 | 6 ft. lbs |
| 1 | 15 ft. lbs., Step 2: 70 | 15 ft. lbs |
Normal service, condensed from the factory interval matrix.
| At 120,000 mi | Oxygen Sensor (replace) |
Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.
Owner complaints about the 2013 BMW 135I Coupe dominate in one area — the air bags, 10 of 15 reports (67%), well ahead of the next concern. That matters, because the air bags are also the target of recalls 20V-017 and 16V-071 on this vehicle — so the single most useful check before buying or servicing one is confirming they were actually performed. 0 of the reports describe a crash and 1 a fire — a small share of the total, but worth weighing against the air bags pattern above. These are tallies of what owners actually reported to the federal government, not an editorial score — and higher-selling models naturally rack up more reports.
All 15 complaints on record, top 5 components.
Source: NHTSA Office of Defects Investigation complaint database.
Showing 2 of 2 campaigns on record for this vehicle.
BMW of North America, LLC (BMW) is recalling certain 2008-2013 128i and 135i Convertibles, 128i, 135i, and M Coupes, 2007-2010 X3 30si and X3 xDrive30i, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i, 2007-2013… Remedy: BMW will notify owners, and dealers will replace the driver air bag. On X5 and X6 vehicles, only the inflator will be replaced. All repairs will be performed free of charge. The…
BMW of North America, LLC (BMW) is recalling certain model year 2008-2013 128i and 135i coupes and convertibles and 1 Series M coupes, 2006-2011 325i, 325xi, 328i, 328xi, 328i xDrive, 330i, 330xi, 335i, 335xi, 335i… Remedy: BMW will notify owners, and dealers will replace the driver's frontal air bag module or inflator depending on the vehicle model, free of charge. The recall began March 9, 2018…
Showing 5 of 268 bulletins on record with NHTSA.
| Bulletin | Date | Component | Summary |
|---|---|---|---|
| B611305 | 2024-01-11 | Electrical System | The electrical system of BMW vehicles has been subject to an ongoing development process… |
| SB23-01 | 2023-08-02 | Steering | Spl Parts, Inc. communications index accompanying MCP uploads 23mc40464 & 23mc40471 |
| SB 23-01 | 2023-07-14 | Suspension | SPL Parts, Inc. manufacturers and distributes aftermarket lower control arms for… |
| B010122 | 2023-05-01 | Equipment | With the court's FINAL approval, BMW of North America, LLC (BMW NA) has entered into a… |
| B010919 | 2022-12-01 | Fuel System, Gasoline | For the eligible vehicles, BMW of North America, LLC (BMW NA) is extending the limited… |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
7.0 qt of 0W-30, 0W-40, 5W-30, 5W-40 OIL MEETING BMW SPECIFICATION LL01, per the factory manual.
NHTSA lists 2 recall campaign(s) for this model year. Check your specific vehicle by VIN.
EPA figures are 18 city / 25 highway / 20 combined mpg.