2014 Audi TTS Quattro

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2014 TTS Quattro.

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

Lug nut torque89 ft-lbsOEM · verified

Fitment & sizes

Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.

From the factory this vehicle uses OE oil filter 06D115562. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.

OE service part numbers OEM · verified

Engine oil filter	06D115562
Engine air filter	1K0129620
Fuel filter	1K0201051K
Spark plug	06H905601A
Battery	000915089BD alt 000915089G
Front wiper blades	8J1955426C alt 8J1955425C
Serpentine belt	06F260849L
Thermostat	06F121111H
Cabin air filter	1K1819669

Full specifications

Engine, drivetrain, dimensions and economy.

Dimensions & weight NHTSA vPIC

Overall length	165.4 in
Overall width	72.4 in
Overall height	52.8 in
Wheelbase	97.2 in
Curb weight	3219 lb
Track (front / rear)	61.4 / 61 in
Weight distribution (front / rear)	61/39

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

Torque lug nuts to 89 ft-lbs. The firing order is 1-3-4-2.

Engine torques

Oil Pump to Cylinder BLock Bolts/Studs

17 ft-lbs

Chassis torques

Lug Nuts

89 ft-lbs

Ignition

Cylinder Firing Order	1-3-4-2
Spark Plug Manufacturer	Audi/VW
Spark Plug Torque	22 ft-lbs
Spark Plug Torque	22.0 ft-lbs

Service checks

Engine Compression

159-203 PSI @ RPM. 44 maximum variation PSI.

Multi-step torque procedures OEM · verified

Camshaft Bearing/Carrier Cap Bolts or Studs — tightening sequence 1 stages

1

6 ft. lbs., Step 2: 90

6 ft. lbs

Connecting Rod (Large End) Bearings — tightening sequence 1 stages

1

33 ft. lbs., Step 2: 90

33 ft. lbs

Engine Flywheel Bolts — tightening sequence 1 stages

1

44 ft. lbs., Step 2: 90

44 ft. lbs

Intake Manifold to Engine Bolts — tightening sequence 1 stages

1

2 ft. lbs., step 2: 7

2 ft. lbs

Exhaust Manifold to Cylinder Head Bolts — tightening sequence 1 stages

1

3.7 ft. lbs., step 2: 8.9 ft. lbs., step 3: 11.8 ft. lbs., step 4: step 18.4

3.7 ft. lbs

Factory maintenance schedule OEM · verified

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the engine oil and filter at 5,000 mi; spark plugs at 35,000 mi.

At 5,000 mi	Brake System (inspect) · Engine Oil (drain & refill) · Engine Oil Filter (replace) · Headlamp Washer Nozzle (inspect) · Headlamp Washer System (inspect fluid level) · Tire & Wheel Assembly (rotate)
Every 10,000 mi	Brake System (inspect) · Engine Oil (drain & refill) · Engine Oil Filter (replace) · Headlamp Washer Nozzle (inspect) · Headlamp Washer System (inspect fluid level) · Tire & Wheel Assembly (inspect)
At 15,000 mi	Air Conditioning Evaporator Case Drain (inspect) · Battery (inspect) · CV Joint Boot (inspect) · Cabin Air Filter (replace) · Door Hinge (lubricate) · Drive Axle Assembly (inspect)
Every 20,000 mi	Air Conditioning Evaporator Case Drain (inspect) · Battery (inspect) · CV Joint Boot (inspect) · Cabin Air Filter (replace) · Door Hinge (lubricate) · Drive Axle Assembly (inspect)
At 35,000 mi	Body Latches, Locks & Hinges (lubricate) · Brake Rotor (inspect) · Engine Air Filter Element (replace) · Engine Air Filter Housing (clean) · Hood Latch (lubricate) · Spark Plugs (replace)
Every 40,000 mi	Body Latches, Locks & Hinges (lubricate) · Brake Rotor (inspect) · Engine Air Filter Element (replace) · Engine Air Filter Housing (clean) · Hood Latch (lubricate) · Spark Plugs (replace)
At 75,000 mi	Accessory Drive Belt (inspect)
At 110,000 mi	Timing Belt (replace) · Timing Belt Tensioner (inspect)
At 155,000 mi	Accessory Drive Belt (inspect)